Muby Chemicals and a few more manufacturing units are in Mubychem Group, the pioneer manufacturer of Zinc Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Ammonium Chloride, & Pharmaceutical Chemicals in India ince 1976. Currently we have manufacturing facilities spread across Western India. No other vendor in the world knows Sodium Acetate any better than we do. We are exporters to all the countries across the globe.

(FDA) GMP GLP Approved, ISO-9001 Certificate, "REACH" registered, ISO-22000, Kosher Certified' Halal Certified, HACCP

-------------------

Sodium Acetate Trihydrate Anhydrous Crystals Granules Deicers Snow Melting Manufacturers

Sodi. Acetate USP FCC

Sodium Acetate Manufacturers

Sodium Acetate Anhydrous Trihydrate Manufacturers

Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Acetate and various other chemicals in India. Mubychem Group has manufacturing facilities spread across Gujarat and Maharashtra (Western India).

Sodium Acetate is manufactured by the reaction of Soda Ash with Acetic Acid. The reaction is exothermic. To control heat the reaction is done in a very large volume of liquor.

Crystals are formed after evaporation of the reacted liquor and the material is centrifuged and dried. The material so produced is very high quality and the first crop is surpassing all the standards.

We also offer, Sodium Acetate BP IP, Sodium Acetate USP or Extra Pure made at our FDA approved world class plant Anmol Chemicals an ISO-9001-2008 Certified Company using standard GMP techniques

PARTICULARS	SODIUM ACETATE IP GRADE
Dry Basis Assay	99 to 101%
Characteristics	Colourless Crystals
Solubility	Soluble in 0.8 part of water and in 19 parts of Ethanol (96%)
Clarity and colour of 10% w/v solution	Clear and Colourless
Alkalinity (pH of 5% solution)	7.5-9.0
Arsenic	2 ppm
Calcium and Magnesium (calculated as Ca)	50 ppm
Heavy Metals as Lead	10 ppm
Iron	10 ppm
Chloride	200 ppm
Sulphate	200 ppm
Reducing Substances	Passes test
Packing	In 50 Kg HDPE bag with HMHDPE liner

Sodium Acetate USP Specifications

Assay— Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.

We also offer Snow Melting, Deicing Pure Sodium Acetate Granules for Airport and Concrete Deicing.

Sodium Acetate Anhydrous Trihydrate manufacturers at:

MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264